using stainless steel cable system
Installing the Stainless Steel Cable System
Fit the cable into the hanger and feed it all the way through so the brass fitting sits on the hanger.
Slide the hanger into the track. It will slide to any position along the track. The track slide is designed so that it can be fitted into the track or removed at any point along the track length, or it can slide in from one end. This means less remounting of other works when rehanging.
Fit the hook onto the cable and adjust it up or down to the position you want. Lock the Classic Hook into place with the key provided in the pack. The cable is then clamped between two metal surfaces in the hook to provide a very powerful grip, and it won’t bend or mark the cable when you move the hook. The Push Button Hook locks into place when you release the button.
Also, you can put more than one hook on a cable.